Cloth Care Instructions
Care instructions For Your Cloth nappies and other products
It order to keep your nappies/products free from damage and covered by our warranty, it is important that nappy shells are washed at a max temp of 50*c.
The maximum recommended machine spin speed is 800RPM.
LOW Heat tumble dry only boosters with caution as high heats can damage the bamboo fabric and will damage the booster snaps.
Upon receiving your New nappies, they only need one wash cycle to gain absorbency for immediate use, this also cleans any chemicals from the fabric making processes.
WASH ROUTINE, DRY PAIL, PRE WASH & WASH Before washing your new nappies, unsnap all the nappy shells and ivtserts Frowt themselves. Rinse dirty nappy to remove solids or tip solids into toilet.
Dry pail nappy until wash day,
Do not leave any longer than 2-3 days.
Wash nappy out a warm rinse cycle with detergent out a short cycle of 30-40 degrees. Stains can be treated with Sard Soap Bars, spray or roll out stain removal products at the time of prewash.
Do not leave products on the nappy's in dry pail. Full wash cycle 40-50 degrees with detergent on a gentle cycle or everyday cycle.
DO NOT USE Fabric softeners/ Bleach/ Vinegar/household cleaning products.
Hang nappies and inserts on clothes line to dry- hang by pegging front and back of nappy sideways on line to avoid over stretching of elastics, dry in the sun for a maximum of 2 hours, do not leave in harsh sun light.
Please Note-
Do not wash the nappy shells, wet bag or our other products on a hot wash any more than 50 degrees as this can deteriorate the lining and damage the snaps and will void your warranty.
To avoid damaging or fading fabrics, do not soak in chemicals or bleaches, unless doing a once off strip and sanitize clean.
I recommend using a micro Fleece liner when using nappy creams which can be reused by washivtg with your nappies.
Nappy rash, skin barrier creams are fine to use but will require a warm wash to remove oil and zinc residue that will impact absorbency.